Multi-channel amp with lots of power
The new, really powerful Omnitronic multi-channel amplifiers are called MCD. 3 models with 4, 6 or 8 channels enable you to realize versatile multi zones setups, for example for retail-shops, gastronomy locations or multi-purpose halls. You can even think of club installations with subwoofers and tops. The only thing you need to do so properly is the digital speaker management system of the Omnitronic DXO series.
500 watts @ 4 ohms per channel is what each of the models is offering you. If you are working with demanding subs you can simply bridge each channel pair and get 1000 watts @ 8 ohms.
A real benefit for your rental and touring business: all members of the MCD series are lightweights, thanks to class D architecture and efficient switch mode power supplies. In addition you can save money with the automatic standby function, which reduces the power consumption while you do not use the amp.
The new, really powerful Omnitronic multi-channel amplifiers are called MCD. 3 models with 4, 6 or 8 channels enable you to realize versatile multi zones setups, for example for retail-shops, gastronomy locations or multi-purpose halls. You can even think of club installations with subwoofers and tops. The only thing you need to do so properly is the digital speaker management system of the Omnitronic DXO series.
500 watts @ 4 ohms per channel is what each of the models is offering you. If you are working with demanding subs you can simply bridge each channel pair and get 1000 watts @ 8 ohms.
A real benefit for your rental and touring business: all members of the MCD series are lightweights, thanks to class D architecture and efficient switch mode power supplies. In addition you can save money with the automatic standby function, which reduces the power consumption while you do not use the amp.
8-channel PA amplifier with SMPS, 4 ohms: 8 x 500 W, 8 ohms: 8 x 250 W
- PA amplifier with integrated limiter for multi-zone applications
- 8 x 150 W/4 ohms
- 8-ohm bridge operation possible
- Signal inputs via balanced XLR mounting jacks and terminal blocks
- Speaker connection via terminal blocks
- Tamper-proof level adjustment on the rear panel
- 3-fold output meter with clip LED per channel
- Speaker switch-on delay
- Fan cooling
- Robust steel chassis with aluminum front
- Complete protection set against short-circuit, overheat, overload, and DC voltage overlay at the outputs
- Rack installation with 3 units
| Power supply: | 230 V AC, 50 Hz |
| Power consumption: | 700 W (1/8 power) |
| Power output sine: | |
| 4 ohms: | 8 x 500 W |
| 8 ohms: | 8 x 250 W |
| 8 ohms bridged: | 4 x 1000 W |
| Frequency range: | 22-25000 Hz |
| Damping factor: | > 500 |
| Distortion factor: | < 0.003 % |
| SN ratio: | 120 dB |
| Slew rate: | >10 V/µsec |
| Min. input sensitivity: | 2 V |
| Input impedance: | 12 kohms (unbalanced), 22 kohms (balanced) |
| Input connectors: | XLR female, terminal blocks |
| Output connectors: | Terminal blocks |
| Indicators: | Level with clip per channel, bridged |
| Protection circuits: | Softstart, short-circuit, overheat, overload and DC voltage |
| Construction: | Steel chassis with aluminum front panel |
| Dimensions: | 483 x 388 x 101 mm |
| Weight: | 9.3 kg |
OMNITRONIC MCD-4008 8-Channel Amplifier
- Gamintojas: OMNITRONIC
- Prekės kodas: 10452413
- Prieinamumas: Išparduota
- 757.74€